BioShake XP

Tube and Plate Mixer

Precise Mixing of Biological Samples

A bench-top shaker you can depend on

When you see the BioShake XP in action, youll understand why it is now one of the most popular plate shakers in Europe. With a footprint no bigger than 2 microplates side-by-side, its near indestructible design promises years of hassle free mixing. And its over-the-top performance guarantees well-mixed samples in a variety of tube and plate types. Buckle in your plates, theyre in for a satisfying ride.


The science of mixology

German designed and manufactured, BioShake Plate Mixers offer an, ultra-efficient, totally controlled shaking axisl so that samples mix completely in a fraction of the time of competing systems. The orbital shaking is so precisely controlled, in fact, that you need never spin down your plates after mixing. Even high density plates, or low sample volumes, offer no obstacle for these precision tools. Fully adjustable between 200 rpm and 3000 rpm, well beyond the speeds of most other brands, guarantees fast, splatter-free, mixing for tubes, glass vials or across an entire 1536-well microplate. Discover why BioShake Plate Mixer’s are without peer in the industry.

Instruction Manual
Quick Start Guide
Optimized Mixing
BioShake iQ Thermal Mixer
ThermoE Incubator
FastGene Plate Centrifuge




Your samples will never know what shook them

To say that BioShake Plate Mixers are whisper quiet is not an overstatement. These devices are intended to shake tubes only and mix their contents not vibrate the entire lab bench or robotic deck. A large part of the noise reduction is derived from a patented dampening system that relies upon ingenious counter-weight symmetry. Your eyes will see a blur, but your ears wont believe it.

Vessel Types Microplates, tubes, vials
Part Numbers 1808-0505
Shaking Speed 200 - 3,000 rpm
Shaking Accuracy ± 25 rpm
Programmable Yes, 2 programs (3 steps)
Display 2x16 Alpha-numeric, backlit
Power Requirements 100-240 VAC, 50-60 Hz
Weight 2.7 kg (5.95 lbs)
Size 142 mm x 170 mm x 80 mm
Warranty 2 years parts and labor




NOTE - There is no adaptor needed for most light-weight skirted microplates. For heavier mircoplates, see below.


Part Numbers 1808-1121, 1808-1131, 1808-1141, 1808-1151, 1808-1161, 1808-1171, 1808-1172

* Inquire for other blocks or custom blocks


Part Numbers 1808-1060, 1808-1061, 1808-1062, 1808-1063, 1808-1064, 1808-1067, 1808-1071, 1808-1072, 1808-1073, 1808-1074, 1808-1093, 1808-1094

* Inquire for other blocks or custom blocks