Q1 – What are the best ways to sterilize the tray components?
We recommend for general sterilization to spray with 70% ethanol from time-to-time. The chamber can be distorted after several autoclaving cycles, so in most cases the EtOH wash is preferable.
For a deeper sterilization, please autoclave at 121°C for 15-20 min. Please remove the filters before autoclaving. You do not have to disassemble it. But please make sure to place the chamber horizontally in a sterile bag into the autoclave — this will help avoid deformation from weight on the tray set-up during the heating cycles.